Installation guide

INSTAM TIONINSTRUCTIONS

BeforeYouStart

4. Pull yellow shipping strap firmly, until both ends are

completely removed from washer.

NOTE: To prevent floor damage, set the washer onto cardboard

before moving across floor.

RemoveShippingStrap

Removing the shipping strap is necessary for proper operation. If

the shipping strap is not removed, the washer will make excessive

5. Check that the two (2) cotter pins were removed with the

shipping strap.

noise.

1. Move the washer to within approximately 3 ff (90 cm) of the

final location.

2. The washer must be inthe upright position and not tired

before removing the shipping strap.

3. Locate the yellow shipping strap on the rear of the machine

near the bottom.

.4_

q_, n

A. Yellow shipping strap