Installation guide

f,
2,
3,
4.
5,
6.
7.
Complete Installation
Check the electrical requirements. Be sure that you have the
correct electrical supply and the recommended grounding
method. See "Electrical Requirements."
Check to be sure all parts ere now installed. Ifthere isan extra
part, go beck through the steps to see which step was
skipped.
Check to be sure you have all of your tools.
Check to be sure that the yellow shipping strap was
completely removed from the lower beck of the washen
Dispose of or recycle all packaging materials.
Check to be sure the water faucets are on.
Check for leaks around faucets and inlet hoses.
Electrical Shock Hazard
Plug Into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these Instructions can result In death,
fire, or electrical shock.
8. Plug into a grounded 3 prong outlet.
9. Remove the protective film on the console and any tape
remaining on the washer,
10. Read "Washer Use" inthe Washer User Instructions,
11. To test and to clean your washer, measure 1_of the normal
recommended amount of powdered or liquid detergent and
pour it intothe washer basket or detergent dispenser (on
some models). Close the lid. Select any cycle, and then pull
the cycle control knob out to start the washer. Allow itto
complete one whole cycle.