User Guide

5
icon or will appear on the top left corner of the screen; within 3 seconds, press 3
Shooting/Set Key to switch resolutions.
This camera has two resolutions: high resolution (640×480) and low resolution (320×240); the
defaulted one is high resolution. In Resolution mode, when the icon appears on the top left
corner of the screen, it indicates the current resolution is high. Press Shooting/Set Key to
switch to the low resolution; when the icon appears on the top left corner of the screen, it
indicates the current resolution is low; press Shooting/Set Key to switch to the high
resolution.
• Image Quality
After turning the camera on, hold down Power/Mode Key to switch to Image Quality mode,
then the icon or will appear on the top left corner of the screen; within 3 seconds, press
Shooting/Set Key to switch to Image Quality. This camera has two kinds of quality: High
Quality and Low Quality, the defaulted one is high quality. In Image Quality mode, when the icon
appears on the top left corner of the screen, it indicates the current quality is high; press 3
Shooting/Set Key to switch to the low quality. When the icon appears on the top left corner
of the screen, it indicates the current resolution is low; press Shooting/Set Key to switch to
the high quality.
• Light Source Frequency
After turning the camera on, hold down Power/Mode Key to switch to Light Source Frequency
mode, then the icon 50 or 60 will appear on the top left corner of the screen; within 3 seconds,
press Shooting/Set Key to switch to light source frequencies.
In Light Source Frequency mode, when the icon 50 appears on the top left corner of the screen,
it indicates the current light source frequency is 50Hz, press 3 Shooting/Set Key to switch to
60Hz.
When the icon 60 appears on the bottom left corner of the screen, it indicates the current light
source frequency is 60Hz, press Shooting/Set Key to switch to 50Hz.