User's Manual

14
2.4 Ethernet Settings
The Ethernet port of inbox710 can be used as WAN port or LAN port. It is disabled by default. As
shown in Figure 2-4-1.
Fig. 2-4-1
2.4.1 Used As WAN Interface
Click "Settings > > Ethernet".Click "Use Ethernet" to enable the Ethernet port. When enabled, the
Ethernet is used as WAN interface by default. The WAN interface obtains ip address through
DHCP by default. After successfully obtaining the address, the system will display the obtained
WAN port IP address, netmask, default gateway, DNS server and other interface information,
as well as routing information. As shown in Figure 2-4-2.