DTV-172A 17" LCD TV USER GUIDE http://www.initialdvd.
TABLE OF CONTENTS (FOR TV TUNER) IMPORTANT INFORMATION IMPORTANT SAFETY PRECAUTIONS SUPPLIED ACCESSORIES PREPARATION ● INSERTING BATTERIES INTO THE REMOTE CONTROL ● USING THE REMOTE CONTROL UNIT ● CAUTIONS REGARDING REMOTE CONTROL UNIT FUNCTIONAL OVERVIEW ● FRONT VIEW ● REAR VIEW ● REMOTE CONTROL CONNECTIONS BASIC OPERATIONS ● TURNING ON THE POWER ● TURNING OFF THE POWER ● TV/AV MODE SELECTION WATCHING TV ● TURNING ON THE POWER ● TURNING OFF THE POWER ● SIMPLE BUTTON OPERATIONS FOR CHANGING CHANNELS ● USING
IMPORTANT INFORMATION WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated ''dangerous voltage'' within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
IMPORTANT SAFETY PRECAUTIONS The present set has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. The safeguards incorporated in the present unit will protect you if you observe the following procedures in installing, using and servicing. The present unit is fully transistorized and does not contain any element that can be repaired by the user. 1.
IMPORTANT SAFETY PRECAUTIONS f) When the product displays an abnormal condition. Any noticeable abnormality in the product indicates that the product needs servicing. 12. Replacement parts - In case the product needs replacement parts, make sure that the service person uses replacement parts specified by the manufacturer, or those with the same characteristics and performance as the original parts. Use of unauthorized parts can result in fire, electric shock and/or other danger. 13.
SUPPLIED ACCESSORIES Make sure the following accessories are provided with the product. Power adapter POWER MPX OSD OPEN 1 2 3 4 5 6 7 9 10/0 +10 USB Extension Cable AV cables 8 AUTO DTV-172A CAPTION 17" LCD TV USER GUIDE MUTE VOL CH LAST TV/DVD /AUX/PC TV MENU OK DVD TITLE DVD MENU PLAY PAUSE STOP SEARCH SKIP ZOOM SLOW SETUP P. MODE REMAIN REPEAT RETURN WIDE A. MODE AUDIO SUBTITLE ANGLE http://www.initialdvd.
PREPARATION INSERTING BATTERIES INTO THE REMOTE CONTROL Insert supplied batteries via the battery compartment on the back of the remote control. Make sure polarity matches the (+) and (-) marks inside the compartment. - + + - USING THE REMOTE CONTROL UNIT ● ● ● POWER MPX OSD 1 2 3 5 6 7 Use the remote control by pointing it towards the remote sensor on the TV. Objects between the remote control and the sensor may disrupt operation.
FUNCTIONAL OVERVIEW FRONT VIEW 4 5 6 CH 7 CH VOL 8 VOL TV/AUX/PC 3 2 1 1) REMOTE SENSOR 2) POWER ON INDICATOR 3) STANDBY INDICATOR 4) TV/AUX/PC: Use to select the AV signal source between: TV, DVD/USB/CARD, AUX-Video, AUX-S-Video, AUX-Component,PC. 5) MUTE: Mute the sound. 6) PREV/NEXT (CH+/-): To skip to the previous/next chapter (previous/next channel). 7) VOLUME+/-: Use to adjust the volume. 8) POWER BUTTON: Use to turn the unit on and off.
FUNCTIONAL OVERVIEW REAR VIEW AV1 IN VIDEO L AUDIO S-VIDEO 1 R AV OUT VIDEO L AUDIO CR / PR R CB / PB L AUDIO 2 3 R Y AV2 IN AUDIO VGA PHONES DC IN 1) AV1 IN (Composite Video, S-Video and Audio In) 2) AV OUT (Composite Video and Audio Out) 3) AV2 IN (Component Video and Audio In) 4) VGA, Audio (PC Input) 5) PHONES 6) DC IN page7 4 5 6
FUNCTIONAL OVERVIEW REMOTE CONTROL POWER OSD MPX OPEN 32 1 2 34 33 1 2 3 5 6 7 4 8 AUTO 9 10/0 3 4 31 +10 30 CAPTION MUTE VOL CH 29 LAST 5 6 7 8 9 28 TV/DVD /AUX/PC TV MENU OK DVD TITLE DVD MENU 27 PLAY 10 11 12 13 14 15 16 17 18 PAUSE STOP 26 SKIP SEARCH 25 ZOOM SLOW SETUP RETURN P. MODE REMAIN REPEAT WIDE A. MODE AUDIO SUBTITLE ANGLE 24 23 22 21 20 19 RC-172DT 1) POWER: Use to turn the unit on and off.
FUNCTIONAL OVERVIEW REMOTE CONTROL (CONTINUED) 8) OK: Use to confirm your selections. 9) DVD TITLE: Use to bring up the DVD title menu. 10) PLAY:Use to begin the DVD playback. 11)PAUSE:Use to pause the DVD playback. 12) PREV/NEXT: Use to skip to the previous/next chapter. 13) ZOOM: Use to zoom the DVD playback picture. 14) SLOW: Use to slow the DVD playback speed. 15) P. MODE: Use to shift DVD play mode. 16) REMAIN: Use to display the time of the DVD playback. 17) A.
AV1 IN L R L R page10 DC IN PHONES VGA AUDIO AV2 IN R AUDIO CB / PB CR / PR Y L AUDIO VIDEO AV OUT S-VIDEO AUDIO VIDEO 1a 2d 2a 1b 2f or HDTV Receiver 2c 2e VGA Audio Cable Computer 2b CONNECTIONS
CONNECTIONS 1. CONNECT TO POWER a. Connect the mini plug of the AC power adapter to DC IN jack on the back of the DTV-172A. b. Connect the power plug of the AC power adapter to the power socket. 2. SYSTEM CONNECTIONS a. Using the antenna input: Connect the antenna terminal from an antenna or cable/satellite receiver to the antenna input terminal on the DTV-172A; use the TV/DVD/AUX/PC button and the / buttons to set the DTV-172A's signal source to "TV". b.
BASIC OPERATIONS POWER TV/AUX/PC POWER MPX OSD OPEN 1 2 3 4 5 6 7 POWER CH CH VOL VOL TV/AUX/PC 8 AUTO 10/0 9 +10 CAPTION MUTE VOL CH LAST TV/DVD/ AUX/PC TV/DVD /AUX/PC TV MENU OK DVD TITLE DVD MENU PLAY PAUSE STOP SEARCH SKIP ZOOM SLOW SETUP RETURN P. MODE REMAIN REPEAT WIDE A. MODE AUDIO SUBTITLE ANGLE TURNING ON THE POWER 1. Press POWER button on the front panel to turn on the TV set. The POWER indicator lights up green. 2.
WATCHING TV TURNING ON THE POWER 1. Press POWER button on the front panel to turn on the TV set. The POWER indicator lights up green. 2. If the STANDBY indicator still lights up red, press POWER on the remote control to turn the TV set on. TURNING OFF THE POWER 1. Press POWER on the remote control, the image on the screen disappears and the STANDBY indicator lights up red. NOTE: Even though the TV is turned off a small amount of power is used to maintain various functions.
WATCHING TV Using number buttons on the remote unit NUMBER BUTTONS POWER MPX OSD OPEN 1 2 3 4 5 6 7 8 AUTO 10/0 9 +10 CAPTION MUTE VOL CH LAST Select the channels directly by pressing the number buttons. EXAMPLE: To select a 1-digit channel (e.g. channel 2): ● Press 2 . To select a 2-digit channel (e.g. channel 12): ● Press 1 ,followed by 2 .
WATCHING TV SIMPLE BUTTON OPERATION FOR CHANGING VOLUME/SOUND Changing the volume You can change the volume on the front panel or on the remote control unit. POWER MPX OSD OPEN 1 2 3 4 5 6 7 8 AUTO 9 10/0 +10 CAPTION MUTE VOLUME+/- VOL CH LAST TV/DVD /AUX/PC TV MENU OK 1. Press VOL+ to increase the volume. 2. Press VOL- to decrease the volume. Using MUTE on the remote control Press MUTE to mute the current sound output.
MENU ADJUSTMENT TV TUNER ADJUSTMENT Press TV MENU to bring up the TV menu screen. Press / to select "Settings" and press to enter into the items below ''Settings''. NOTE: Only when in TV status, there is "Settings"option. Make sure press TV MENU to exit TV menu screen before other operatings. TV Source This will help you to select the TV's signal source. 1. Press TV MENU to bring up the TV menu screen. 2. Press / to select "Settings" and press 3. Press to enter "TV Tuner" menu.
MENU ADJUSTMENT TV TUNER ADJUSTMENT (CONTINUED) 4. Press / to select "TV Source". 5. Press / to select your desired TV source between Antenna and Cable; press OK to return; press TV MENU to exit. Automatic channel search Channel auto search finds and memorizes all channels viewable in your area. Select one between ANTENNA and CABLE before this operation. 1. Press TV MENU to bring up the TV menu screen. 2. Press / to select "Settings" and press to select "TV Tuner". 3. Press to enter "TV Tuner" menu.
MENU ADJUSTMENT CONTENT BLOCKING Password 1. Press TV MENU to bring up the TV menu screen. 2. Press / to select "Settings" and press to select "Content Blocking". 3. Press to enter "Content Blocking (Password)" menu. 4. Press to select "Enter" and press to enter the password. 5. Press / to select digit and press / to change the selected digit. 6. Press to select "OK" and press OK to check the password. Then there will be "Change" and "Clear" under "Enter". 7.
MENU ADJUSTMENT PICTURE ADJUSTMENT Press TV MENU to bring up the TV menu screen. Press / to select ''Picture'' and press to enter into below items. 16 16 16 16 tint 16 Contrast 1. Press TV MENU to bring up the TV menu screen. 2. Press / to select ''Picture''. 3. Press / to move to ''Contrast''. 4. Press / to adjust the picture contrast; press OK to return; press TV MENU to exit. Brightness 1. Press TV MENU to bring up the TV menu screen. 2. Press / to select ''Picture''. 3.
MENU ADJUSTMENT PICTURE ADJUSTMENT Tint 1. Press TV MENU to bring up the TV menu screen. 2. Press / to select ''Picture''. 3. Press / to move to 'Tint''. 4. Press / to adjust the tint; press OK to return; press TV MENU to exit. NOTE: Only when in TV,Video and S-Video status, there is “Tint” option. AUDIO ADJUSTMENT Press TV MENU to bring up the TV menu screen. Press / to select ''Audio'' and press to enter into below items. 6 16 16 16 MPX Mono equalizer down for audio settings Volume 1.
MENU ADJUSTMENT AUDIO ADJUSTMENT (CONTINUED) Treble To stress high frequency sound 1. Press TV MENU to bring up the TV menu screen. 2. Press / to select ''Audio''. 3. Press / to move to ''Treble''. 4. Press / to adjust the treble weaker or stronger; press OK to return; press TV MENU to exit. Balance 1. Press TV MENU to bring up the TV menu screen. 2. Press / to select ''Audio''. 3. Press / to move to ''Balance''. 4.
MENU ADJUSTMENT WINDOW ADJUSTMENT PC mode input format VGA SVGA XGA Resolution V freq. (Hz) H freq. (KHz) 640×480 640×480 640×480 640×480 720×400 800×600 800×600 800×600 800×600 1024×768 1024×768 1024×768 60 72 75 85 70 60 75 85 72 60 70 75 31.5 37.9 37.5 43.3 31.5 37.9 46.9 53.7 48.1 48.4 56.5 60.2 In case of inputting the PC signal other than above signals, ''OUT OF RANGE'' will display.
MENU ADJUSTMENT WINDOW ADJUSTMENT (CONTINUED) 2. When the control panel screen appears, click on ''Display'' and a display dialog box displays. 3. Navigate to the ''Setting'' tab on the display dialog box. The correct setting of size (resolution) is ''1024 x 768 pixels''. Check the vertical frequency of your PC.
MENU ADJUSTMENT WINDOW ADJUSTMENT (CONTINUED) Press TV MENU to bring up the TV menu screen. Press / to select ''Window'' and press to enter into below items. display mode 50 H-Position 1. Press TV MENU to bring up the TV menu screen. 2. Press / to select ''Window''. 3. Press / to move to ''H-Position''. 4. Press / to adjust the horizontal position of displayed image; press OK to return; press TV MENU to exit. Display Mode 1. Press TV MENU to bring up the TV menu screen. 2. Press / to select ''Window''.
MENU ADJUSTMENT OPTIONS ADJUSTMENT Press TV MENU to bring up the TV menu screen. Press / to select ''Options'' and press to enter into below items. osd timeout sleep time never 0 minutes down for option settings Menu Background 1. Press TV MENU to bring up the TV menu screen. 2. Press / to select ''Options''. 3. Press / to move to ''Menu Background''. 4. Press / to select the menu background between:Translucent and Opaque; press OK to return; press TV MENU to exit.
MENU ADJUSTMENT OPTIONS ADJUSTMENT (CONTINUED) OSD Timeout It is used to adjust the OSD timeout . 1. Press / to select "OSD Timeout " in "Option" menu. 2. Press / to adjust the "OSD Timeout " : 5sec 10sec 15sec 20sec 60sec never 25sec 50sec 30sec 40sec From 5 to 60 second : the menu will disappear automatically according to the time you selected . Never : when you select the "Never" , the menu will not disappear automatically , you must press TV MENU to exit the LCD menu . 4.
TROUBLESHOOTING Please check the following items before asking for repair service. Symptom Neither picture nor sound. Picture is OK, but no sound. Sound is OK, but no color. Check Items - Check the contact of sockets is all right. - Check the TV main power is on. - Check the volume control is set to minimum or mute. - Check the color control and adjust it properly. - Check the programme is in color or in black & white. The picture is overlapped image.
SPECIFICATIONS PANEL 17'' WIDE TFT LCD RESOLUTION 1280 X RGB X 768 (WXGA) ACTIVE AREA (mm) LCD VIEWING ANGLE (°,U/D/L/R) CONTRAST RATIO BRIGHTNESS (cd/m2) WITH STAND (mm) DIMENSION WITHOUT STAND (mm) WEIGHT (WITHOUT ACCESSORIES) TV STANDARD 45/45/60/60 400:1 450 500 X 352 X 220 500 X 292 X 83 13.7lbs (6.
LCD VIEWING ANGLE ADJUSTMENT Horizontal Adjustment 5 5 Vertical Adjustment 10 page29
