User's Manual

Promi-ESD User Manual – Configurations 22
© 2005 Initium Co., Ltd. All rights reserved.
Choose the settings in File->Properties->Settings->ASCII setup that let you
turn echo on in HyperTerminal; this will show the response Promi-ESD sends
on the screen.
You now get the HyperTerminal window where you are able to control Promi-
ESD with AT commands. For expanded AT commands that Promi-ESD provides,
please refer to Appendix A. AT commands.
Example of AT commands:
AT+BTINFO?
000B53000509,PSDv2a-000509,MODE0,STANDBY,0,0,HWFC
OK
A
T+BTINQ?
000B5320007E,PSDv2a-20007E,001F00
0004B300E205,AP2002:1 #0,020300
OK
A
TD000B53000509
OK
CONNECT 000B53000509