Manualshelf

User's Manual

ManualsBrandsINITIUM ManualsElectronicsPromi-ESD02
41424344454647484950
Promi-ESD User Manual – Appendix A AT Commands
A-9
© 2005 Initium Co., Ltd. All rights reserved.
from the Bluetooth device with the given BD address. If
the parameter of
to
is 0, it will wait forever.
When connection is made with the Bluetooth device, SD
response will be ‘CONNECT’ with its BD address. If there
is no connection made within this time duration, SD
response is ‘ERROR’ and the operation status becomes to
‘Standby’.
Reference ATD, AT+BTINQ?, AT+BTCANCEL
Example AT+BTSCAN000B530011FF,30
15 ATD
Response OK
CONNECT 112233445566
or
OK
ERROR
Purpose Connect to the last connected Bluetooth device
Description Promi-SD saves the BD address of the Bluetooth device
most recently connected. ATD can make connection to it
without input its BD address.
If it fails to make connection, SD response is ‘ERROR’.
Reference AT+BTINQ?, AT+BTSCAN
16 ATD112233445566
Response OK
CONNECT 112233445566
or
OK
ERROR
Purpose Connect to the Bluetooth device with given BD address
Parameters 112233445566=BD address
Description Promi-SD attempts to connect to the Bluetooth device
with the given BD address. To make successful
connection, the Bluetooth device must be in Page scan.
This attempt continues for 5 minutes.
If it fails to make connection, SD response is ‘ERROR’.