User's Manual

Promi-ESD User Manual – Appendix A AT Commands
A-12
© 2005 Initium Co., Ltd. All rights reserved.
23 AT+BTNAME=$string
Response OK
Purpose Change device name
Parameters $string = New device name (Default=”PSDv3b-445566”)
Description Promi-SD can have a user friendly name to identify
easily. The name allows 30 alpha-numeric characters
maximum.
Reference AT+BTINFO?, AT+BTINQ?
Example AT+BTNAME=”My-Promi-SD”
24 AT+BTLPM,n
Response OK
Purpose Set low power mode
Parameters n =0: Inactivate (Default)
n =1: Activate
Description During no data transmission, Promi-SD can be in low
power mode to save the power consumption. It takes a
few seconds to wake up Promi-SD in low power mode.
25 AT&V
Response S0:m0;S1:m1; …Sn:mn
OK
Purpose Display all the S-register
Description All parameters are stored at S-register in flash memory.
These values are sustained until hardware reset.
Reference ATS
26 ATSnn? 
Response value
OK
Purpose Display a given S-register
Parameters nn= Address of S-register
Description A specific S-register is displayed.