User's Manual

Promi-MSP™

Installation Guide ver. 2.0

www.initium.co.kr

 During upgrade, LEDs will flashing and users should NOT turn off Promi-MSP this time.

If user cannot send the ROM file, please check the network connection status.

 Once ROM file is delivered to the connected Promi-MSP, the upgrade firmware will be

recorded to momory. During this time both STATUS LED and ERROR LED will flashing

speedly. NEVER turn off Promi-MSP during this firmware recording.

 Once finished, please resupply power to Promi-MSP for applying.

2.4 Serial Port

Serial port of Promi-MSP can be used for both Configuration and Data communication. For this,

users need to change the DIP switch of Promi-MSP to the right.

Note:

Before to configure the serial port settings, please change the DIP switch to the right.

Users may set configuration of serial port communication in this menu.

Below figure is showing that ‘115200 bps 8-N-1 hardware’ which menas ‘115200 bps, 8 data bit,

None parity, 1 stop bit, hardware flow control (RTS/CTS).

Note:

If you turn off Promi-MSP during firmware upgrade, Promi-MSP may be damaged

severely.