User's Manual

Promi-MSP™

Installation Guide ver. 2.0

www.initium.co.kr

1.1 External View

<Fig. 1.2> Promi-MSP 102(a)/(b) external view

① DIP Switch

Users may select the way of data communication with Host. Default setting is

TCP/IP communication using no. ④ RJ45 marked EXT, but if users need, data

communication by no. ③ RS232 Interface marked “IOIOI” is also possible.

 If DIP switch is on the side of drawing

, Promi-MSP communicates with

Host via Ethernet line (TCP/IP).

 If users want to use RS232 com. please change the direction of switch to the

other way.

② Power Port: For Power Adapter connection

③ RS232 Interface marked “IOIOI”:

For Promi-MSP network configuration via RS232 serial cable - One RS232 serial

cable, both ends female DSUB interfaces, is provided with Promi-MSP.