User's Manual

Promi SD™ User Manual ver 1.7

www.initium.co.kr

2-6. Search SD01 from the searched list. Device Address of SD01 can be found on the

back side of SD01. If you find SD01, press Cancel button to finish searching.

Make sure that Status LED of SD01 is still blinking in Green color.

2-7. Please select SD01 from the searched list, then press CONNECT TO button.

2-8. You will get Successful Connection message.

2-9. Now, Status LEDs on Both SD01 and SD02 are Green

, which means they are

connected.

2-10. Do not detach SD02 from your computer yet, we will go to next stage for Auto-

connection (Always-connection).