User's Manual

Promi SD™ User Manual ver 1.7
www.initium.co.kr
20
3-4. Now jobs for SD02 are finished. Detach SD02 from your computer.
3-5. Attach SD01 to your computer.
3-6. Restart Promi-WIN™.
3-7. Select Device Setting icon in the list control box, and select MODE2
in Operation
Mode and apply.
3-8. Now, detach SD01 from your computer.
3-9. Make sure that power to Both SD01 and SD02 are supplied.
With two of the SD01 and SD02, turn off both using Switch on the side of its body.
Then, turn on again Both SD01 and SD02 almost at the same time.
Now, you will see Green Status LEDs on both units.
SD01 and SD02 will be connected automatically, whenever, if configuration is not
changed.