Instructions / Assembly
Important safety instructions:
• Please read carefully all instructions before assembling.
• For your safety and ease,assembly by two or more adults is recommended.
• Keep instructions for future use.
Pre-assembly:
• Remove all parts and hardware from box along with any protective packaging.
Parts List
Item
Description QTY
P1
Chair 1
P2
Legs 4
Hardware List
Item Description QTY
H1
Plastic Wahser 4
ASSEMBLY INSTRUCTIONS
Description:Noe Lounge Chair
• Do not discard any content until assembly is completed to avoid accidentally discarding small parts or hardware.
DRAWING
Step 1.Take out the legs and hardware from package.
DISCLAIMER:
WHEN PROPERLY ASSEMBLED,THIS ITEM IS SAFE FOR INTENDED USE.SELLER IS NOT LIABLE FOR ANY DAMAGES
RESULTING FROM ITEM BEING IMPROPERLY ASSEMBLED AFTER PURCHASE.
Assembly Procedures:
DRAWING
Step 2.Turn the chair upside down and lay on protective carpet, screw in the legs (P2 ) into the screw holes
underneath the base using the plastic washers(H1).
Step 3.Place chair upright on a level surface. Assembly is complete.
Thank you for your purchase
Page 1 of 1
ADDITIONAL NOTE ABOUT SAFETY: BOLTS MAY LOOSEN DURING NORMAL EVERYDAY USE. THEY SHOULD BE
PERIODICALLY INSPECTED AND RE-TIGHTENED TO PREVENT DAMAGE OR INJURY.ALWAYS CHECK TO ENSURE THAT ALL
HARDWARE IS KEPT TIGHTENED.
H1
H1
P2
P1
Remove the plastic
caps from screw
heads before