Users Manual

Q: Why it is failed to connect to Wi-Fi network?
A:
(e) When the Wi-Fi icon on the device screen is flashing, it
means the device is in network configuation. You can
press and hold the power button for 3 seconds to enter
the network configuration and then press and hold it for 3
seconds again to switch between AP mode (slow
flashing) and SmartConfig mode (fast flashing).
(f) Confirm whether your device supports a 2.4GHz Wi-Fi
network or a 5GHz Wi-Fi network, then turn on the
relevant Wi-Fi frequency band of the router to connect.
(g) Make sure your Wi-Fi network name and password are
correct. Mistyped spaces and punctuation will cause the
Wi-Fi configuration to fail.
(h) Location services on the smartphone must be turned
on during connection. In addition, the app needs
permission to access location information. Otherwise,
the Wi-Fi connection will fail.
(i) Keep the smartphone, device, and router as close
together as possible to set up a connection.
To fix temperature probes for more accurate detection.
3x Probe Clamps
08 FAQs
23