BEER Get 10 know the Product = «=v» « » 4 Function Parameter 2 Button Icon Description ionization and reset Temperature and Humidity Monitor and Wireless Remote SOMBER = nen nn 5
® External Prob for wireless remote sensor ee Tamale probe with cable ® Battery: 2XAAA 1.
® wireless remote sensor temperature Measurement range: -40°C ~ 70°C (40°F ~ 158°F) @wireless remote sensor textual probe temperatures measurement range: 50°C ~ 125°C (58 °F ~ 257°F) @ wireless remote sensor supports textual probe ‘and builtin temperature probe using simultaneously ® Temperature display accuracy: 0.1°C ® Temperature measurement accuracy: H.0°C (11.
Quickly press: When there are multiple wireless remote sensor, press to switch the cement ‘channel (CH1, CH2 or CHB) of the wireless: remote sensor, and the wireless remote sensor ‘can be foxed in the current channel.
seconds. (Note: Up to 3 wireless remote sensors can be connected, CH1 = wireless remote sensor 1, CH2 = wireless remote sensor 2, and CH3 = ‘wireless remote sensor 3) Long press (5s): It can reset the synchronization between the Temperature and Humidity Monitor and all wireless remote sensor. After resetting, the ‘wireless remote sensor sends to be re-powered (Re-Install the battery) before It synchronize with the Temperature and Humidity Monitor.
MAX/MIN/GLEAR button to display the maximum minimum temperature and humidity), press to ‘switch the maximum and minimum recording time Interval of temperature and humidity to ALL-TIME or 24 hours. MAX/MIN/CLEAR: Quickly press: pares to display the maximum minimum superstars and humidity. When thees Is no button operation, the current temperature. and humidity display will be restored after 30s. Long press (5s): long press to clear the maximum minimum temperature and humidity record value, then re-record.
© wireless remote sensor (Transmitter) Quickly press: press to send temperature and humility data to the Temperature and Humidity Monitor, when the transmission is successful, the red light of wireless remote sensor will flash once. Long press (Ss): reset the synchronization between the wireless remote sensor unit and the Temperature and Humidity Moonlit.
Monitor, when synchronizing, try to make the wireless remote sensor close to the Temperature ‘and Humidity Monitor. The Temperature and Humidly Monitor and the wireless remote sensor an be synchronized within 2 minutes after the wireless remote saner I re-powered on (Re-Install the battery). 4.1.Synchronization A. Tha first step Is tn correctly Install the battery of the Temperature and Humidity Monitor 10 power oh. B.
the wireless remote sensor Is synchronized with the Temperature and Humidly Monitor, tt hes to ba powered on again (Re-install the battery). Please synchronized within 2 minutes after power-on. After 2 minutes of power-on, Its normal working time, then It cannot be synchronized with the Temperature and Humidity Monitor) €.
sensor is recorded sensor (After the Temperature and Humidity Monitor Is powered off and restarted, it a not necessary to re-synchronize with the wireless remote sensor).
sensors. If you need to re-synchronize, follow the have steps A~D to synchronize. © After the Temperature and Humidity Monitor and the wireless remote sensor are synchronized, If the Temperature and Humidity Monitor doss hot receive the data update from the wireless remote sensor of the corresponding channel for a long time (about 10 minutes or more), will be displayed.