Manualshelf

Instructions for Use

ManualsBrandsINKEE ManualsAccessories3-Axis Action Camera Gimbal Stabilizer Compatible with GoPro Hero9/8/7/6/5, Action,Insta360 ONE R,9H Battery Life, with Tripod and Extension Rod Kits,INKEE Falcon
567891011121314
Grasp the camera and pull it to the specified angle in the tilt direction, stay for half a second
and then lock the current angle.
Indicator
Light Status
Description
Falcon Quick Start Guide
Manual Lock
Indicator Light Status
9
Power off and standby mode shows the current power from left: 0-25%,
25-50%, 50-75% and 75-100%.
Blue LED Light
After power on the stabilizer, it represents the mode status from left to right:
Following mode (PF), Lock mode (HL), FPV mode, Flashlight mode (FL);
under GL mode all LED lights are on.
Green LED Light
Display the Bluetooth connection status. It is always on when the Bluetooth
is connected while it is always off when no connection. After pairing is
cleared, the light will flash slowly during the Bluetooth scanning, if there is
connected then always on if not then off light.
Red LED Light
Display the current upgrade status. The red-light flashes rapidly during
upgrade, and it will turn off after three seconds when upgrade completed.
When the power is lower then 10% the red-light flashes slowly, if can’t
upgrade or upgrade fails then the red light will always be on.