User's Manual

10
TV
ANTENNA
2
Connect the other end of this cable to the
TV antenna terminal on the rear panel.
Connecting to a Cable Box that Descrambles Some Channels
If your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will
need a two-way splitter, an RF(A/B) switch, and four lengths of coaxial cable. (These items are available at most
electronics stores.)
ANTENNA
IN
Incoming
Cable
Splitter
IN
CABLE OUT
Cable Box
Incoming
Cable
Splitter
1
Find and disconnect the cable that is connected to the ANTENNA IN terminal on your cable box.
2
Connect this cable to a two-way splitter.
3
Connect a coaxial cable between an OUTPUT terminal on the splitter and the IN terminal on the
cable box.
This terminal might be labeled “ANT IN”, “VHF IN”, or simply “IN”.