User's Manual

11
IN
CABLE OUT
Cable Box
Incoming
Cable
Splitter
A
B
RF (A/B)
Switch
4
Connect a coaxial cable between the ANTENNA OUT terminal on the cable box and the B-IN
terminal on the A/B switch.
IN
CABLE OUT
Cable Box
Incoming
Cable
Splitter
A
B
RF (A/B)
Switch
5
Connect another cable between the other OUT terminal on the splitter and the A-IN terminal on
the RF(A/B) switch.
IN
CABLE OUT
Cable Box
Incoming
Cable
Splitter
TV
ANTENNA
A
B
RF (A/B)
Switch
6
Connect the last coaxial cable between the OUT terminal on the RF(A/B) switch and the VHF/UHF
terminal to the TV antenna terminal on the rear panel.
After you’ve made this connection, set the A/B switch to the “A” position for normal viewing. Set
the A/B switch to the “B” position to view scrambled channels. (When you set the A/B switch to
“B”, you will need to tune your TV to the cable box’s output channel, which is usually channel 3 or
4.)
CONNECTING VCR
These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the
instructions on pages 8 - 9). Skip step 1 if you have not yet connected to an antenna or a cable system.
TV
ANTENNA
1
Unplug the cable or antenna from the rear
of the TV.