User's Manual

9
Separate VHF and UHF Antennas
Cable without a Cable Box
Connecting to a Cable Box that Descrambles All Channels
If you have two separate antennas for your TV (one VHF and one UHF), you must combine the two antenna
signals before connecting the antennas to the TV. This procedure requires an optional combiner-adaptor
(available at most electronics shops).
UHF
VHF
1
Connect both antenna leads to the
combiner.
ANTENNA
OUT
ANTENNA
IN
1
Find the cable that is connected to the
ANTENNA OUT terminal on your cable box.
TV
ANTENNA
UHF
VHF
2
Plug the combiner into the TV antenna
terminal on the rear panel.
CONNECTING CABLE TV
To connect to a cable TV system, follow the instructions below.
Plug the incoming cable into the TV antenna terminal
on the rear panel.
TV
ANTENNA
Because this TV is cable-ready, you do not need a
cable box to view unscrambled cable channels.
This terminal might be labeled “ANT OUT”, “VHF
OUT”, or simply, “OUT”.