User's Manual

⑤ Wireless Modem & control board
They make the signal for communicating the upper systems. The communication is
for receiving and sending the alarm and control signals. Also, the data including the
information of product is communicating with MCU.
⑥ PSU
It changes the input power (110~230VAC) into DC+27V, DC+15, and DC+7V for
operating each module.
⑦ MCU
It has a computer interface. The operator can monitor several kinds of alarms and
control the system by using the connected computer.
3.4 Other parts
① RF connector: N female (Donor enclosure), SMA female (Donor shelf)
② Optic adapter: FC/ APC type
③ Bracket (Enclosure): The bracket is used for mounting the repeater on the wall.