User's Manual

JUNI JF43-E1900/CFN03
CDMA FIBER FED REPEATER OPERATIONS MANUAL
Version 1.17 ⓒ J
uni America Inc. Page 29 of 88
3.5.8 Remote Unit Eye Bolts
There are two captive eye bolt tapped holes located at the top of the RU which is
located next to the fan compartment. The length of the tapped hole is 0.7 inches or
18mm. The customer supplied ¼” 20UNC eye bolts may be used to assist in hoisting
the RU above the ground for wall or pole mount solutions.
Prior to using the eyebolts, ensure that the three eyebolts are securely attached to the
top of the RU. Check that the cables used to lift the DHU is securely fastened to the
eyebolts before it is lifted.
[Figure 3.10] Remote Unit Eye Bolt Patterns
3.5.9 Remote Unit Standard Wall Mount Guide
The RU is capable of being wall mounted. There are two horizontal panels extending
from the body of the RU at the top and bottom with holes along the panel to allow
bolts and nuts to be fastened.
The wall mount holes will accommodate bolt diameters up to a maximum of 0.39
inches. Drill holes in the wall or area in which it is to be installed, to match the
mounting holes on the panels.