User's Manual

JUNI JF43-E1900/CFN03
CDMA FIBER FED REPEATER OPERATIONS MANUAL
Version 1.17 ⓒ J
uni America Inc. Page 41 of 88
4. Operation
This section provides guidelines for operating the JF-43 system via GUI interfaces.
Information is provided on how to verify all units are operating properly and all
performance requirements are satisfied. This process assumes that the units have
been installed in accordance with the system design plan.
4.1 Introduction
The process of turning on the system and verifying operation involves powering up
various site names and adjusting the RF signal levels. The operator can control and
monitor the system parameters by using the LMT software provided.
4.2 LMT Operation (Local Maintenance Terminal)
4.2.1 Introduction
The JF43 repeater can be controlled via the LMT (Local Maintenance Terminal)
software installed on a computer. This enables the operator to monitor and control the
repeater by connecting a PC to the repeater via a linked or wireless communication
protocol.
4.2.2 Screen Description
When the Juni_Serial.exe file is started and the program does not detect a connection
with the repeater, the following screen is displayed.