User's Manual

JUNI JF43-E1900/CFN03
CDMA FIBER FED REPEATER OPERATIONS MANUAL
Version 1.17 ⓒ J
uni America Inc. Page 44 of 88
illustrated below.
[Figure 4.4] Status & Control
3) Communication status with Repeater: The Progress Bar and LED's display the
status of communication with the Repeater at the bottom of the screen.
4) Status: Displays “Disconnect” when there is no communication and “Connect”
when there is communication between the repeater and the LMT program.
4.2.3 Communication Settings
When the repeater is connected to the computer via USB cable for the first time, it will
automatically detect the hardware and run the new hardware wizard. Install the
manufacturer supplied driver to enable communication between the repeater and the
computer.
4.2.4 Repeater Setup
To configure the repeater settings, click the “Option” menu and select the “Repeater
Setup” as shown in Figure 4.5. This will bring up the “Repeater Set up” window as
shown in Figure 4.6 below.
[Figure 4.5] Choosing Repeater Setup