User's Manual

JUNI JF43-E1900/CFN03
CDMA FIBER FED REPEATER OPERATIONS MANUAL
Version 1.17 ⓒ J
uni America Inc. Page 46 of 88
to read and save the settings. Entering a value without check the box will have no
effect on the repeater. Once the values have been inputted, press ‘Save’ to save the
values and ‘Load’ to load the offset values to the unit. When complete, uncheck the
marked boxes and close the offset window.
[Figure 4.8] Offset Calibration
4.2.6 Repeater Status Monitoring and Control
To view the status of installed Repeaters, double click on the desired Repeater in
Figure 4.5 to bring up the Control Window. This can also be done by right-clicking on
the desired Repeater and selecting the “Status & Control” command as shown in
Figure 4.4.