User's Manual

JUNI JF43-E1900/CFN03
CDMA FIBER FED REPEATER OPERATIONS MANUAL
Version 1.17 ⓒ J
uni America Inc. Page 49 of 88
6. UL
① UL0 RF Fault: Displays the alarm state of the Uplink0 Amp.
② UL1 RF Fault: Displays the alarm state of the Uplink1 Amp.
③ UL1 Lock Fault: Displays the alarm state of the Uplink1 Lock.
④ Local Amp: Displays the alarm state of the Local Amplifier.
⑤ UL-0 ATT: Sets/Displays the Uplink-0 attenuation. Attenuator that controls the
Uplink0 path gain.
⑥ UL-1 ATT: Sets/Displays the Uplink-1 attenuation. Attenuator that controls the
Uplink1 path gain.
7. SAW
① SAW Local Fault: Displays the alarm state of the Downlink SAW Local Lock.
8. Reset
① Uses the software to reset the system.
9. SAW Ctrl
① Displays the selected frequency band for the SAW Filter. Allows control and
selection of the 85 different frequency band combinations. Table 4.1 below displays
all the possible frequency combinations with Table 4.2 showing the frequency
ranges for each of the bands.