User Manual

5.3.3. BRACKET/MTG CONCRETE WALL Mounting

1) Drill on the wall as the BRACKET- ANT distance. (forφ 10mm Hole depth to be 30 to 40

mm.)

2) INSERT SET- ANCHOR TO DRILLED HOLE.

3) Secure BRACKET- DU to the Wall and fix the nut.

[ BRACKER- DU 1ea, SET- ANCHOR 4ea]

Fig. 12 CONCRETE WALL MOUNTING MTG BRACKET- DU Connection Sequence

5.4 DU Connection (same as 5.1) with BRACKET(same as 5.2)

1) APPLY DU to the BRACKET.

2) Apply the NUT to the upside of BRACKET like below sequence. – Do not apply the NUT