User's Manual Part 1

Operating Your Device
English
17
Installing the Application on Your
Phone
1
Visit Play Store on your Android
Smartphone.
Or visit App Store on your iPhone.
2
Search for Sherwood Remote.
3
Download and install the application on
your phone.
4
Open the application.
5
Tap Select Product and WD-1.
Connecting Your Phone with the Main
Unit
•
On an Android phone
1
Go to Wireless & networks settings in
your Android smartphone.
2
Enable Wi-Fi direct or Portable Wi-Fi
hotspot.
•
When you connect your phone with
the main unit using a Wi-Fi hotspot,
you should enter the password
(1234567890) for the main unit
connection.
3
Go to Wi-Fi settings to select and tap
WD-1 and Connect.
•
When Ethernet is not connected to
the main unit, you cannot use Wi-Fi
connection even though Wi-Fi hotspot is
enabled on your phone.
Note
•
On an iPhone
1
Go to Wi-Fi hotspot settings to select and
tap WD-1.
Using the Application
The Sherwood Remote application helps you
to control the main unit remotely by allowing
you to use Wiink.
1
Open the Sherwood Remote application.
2
When the product search window is
activated, select and tap WD-1. Then,
you can use your smartphone as a
remote control for the main unit.
•
When a network error occurs, the
following screen will pop up.
•
Select Product: Check your smartphone
network connection, and select the main
unit again.
•
Demo Mode: Use the application in
Demo Mode.
•
Retry: Try to open the application again.
Note