Saw User Manual

Product Specifications
Convertible Motor Unit
Variable Speed Motor Unit
Permanent Magnet DC motor, rectified for AC outlets
Max Torque: 48 oz-in
Max RPM: 2800
Shaft OD: .312" (5/16") Stainless Steel
Available in 115V or 230/240V models
Two Year Full Confidence Warranty
Parts and Accessories
40960 6 ½" x .020" Trim Saw Blade - Standard: A great all-around diamond
blade for cutting hard materials.
40961 6 ½" x .012" Trim Saw Blade - ThinCut™: A little bit thinner diamond
blade, which will cut a little faster and consume a little less material, but will also
be a little less durable.
40968 6 ½" x .008" Trim Saw Blade - Extra ThinCut™: Our thinnest diamond
blade, for use on the most precious materials when you need to minimize the
waste involved in cutting.
90960 MetalCut™ 6 ½" Trim Saw Blade: Toothed blade for use when cutting
soft (nonferrous) metals such as copper, brass, or silver, and some plastics. 24
TPI (teeth per inch).
90964 WoodCut™ 6 ½" Trim Saw Blade: Toothed blade for use when cutting
wood and some plastics. 10 TPI (teeth per inch).
69801661 Rip Fence Kit: Use to saw uniform width strips and pieces.
10685 6" Flat Lap Conversion Kit: Convert any SwapTop Table Saw into a flat
lap machine for shaping and polishing. Includes 4 graduated grit diamond laps,
master lap, polishing pad, and compound.
10885 8" Flat Lap Conversion Kit: Convert any SwapTop Table Saw into a flat
lap machine for shaping and polishing. Includes 4 graduated grit diamond laps,
master lap, polishing pad, and compound.
10655 Grinder / Shaper Conversion Kit: Converts any SwapTop Table Saw
into a diamond grinder / shaper.
Service
For questions or comments regarding the use of this or any Inland product,
visit our website at www.inlandcraft.com; email us at [e-mail];
call Inland Customer Service at 1-800-521-8428 from 9 AM to 5 PM EST or write:
Inland Craft Products, Co.
32052 Edward Drive
Madison Heights, MI 48071
SwapTop™ Table Saws
Users Guide
Thank you for buying this Inland product. These instructions cover assembly
and use of the SwapTop™ Table Saw (models 10630, 10660, 10670) and the
SwapTop™ Table Saw Conversion Kit (models 10665, 10675). Please read all
the instructions to understand the correct components, set-up, and use of your
machine.
Safety
√√
√√
√ Always wear safety glasses or goggles. You can use a FaceShield™ or
MagnaShield™ for additional protection.
√√
√√
√ Plug into a grounded electrical system. Do Not override the grounding system.
√√
√√
√ If your motor unit has a speed control feature, make sure that you set it at the
maximum speed for proper operation.
√√
√√
√ Always unplug your machine when switching between set-ups, installing
blades, and making adjustments.
√√
√√
√ Place on a sturdy, level, water tolerant surface at a comfortable working height.
√√
√√
√ Never operate with guard covers and safety features removed or disabled.
Parts List
Use the chart and picture to verify you have the parts needed for your model
Name Qty 10630 10660 10665 10670 10675
A Machine Base 1 yes yes no yes no
B Motor Unit 1 yes yes no yes no
C Removable Work Surface 1 yes yes yes yes yes
D Blade Arbor & Nut 1 yes yes yes yes yes
E Blade Arbor Wrench 1 yes yes yes yes yes
F Protractor 1 yes yes yes yes yes
G Blade Guard 1 yes yes yes yes yes
I 5/64" Allen Wrench 2 yes yes yes yes yes
J Plastic Drain Tube 1 yes yes yes yes yes
6 ½" Saw Blade 1 WoodCut MetalCut MetalCut Diamond Diamond
Table Saw
Height: 6 ½"
Blade Diameter: 6 ½"
Work Surface: 12" x 9 3/4"
Maximum Cutting Thickness: 1"
Rev No. 5 Stock No. 69861060