Installation Manual

Desktop Computer SSD Installation
1. Shutting down your computer and removing all the cables form the back.
2. Open your desktop computer case. (Refer to your computer’s manual for
instructions).
3. Unplug the SATA cable from your HDD and remove it from the bay.
4. If you do not have a 2.5-inch drive bay available, you need to attach the
mounting adapter to fit the larger 3.5-inch drive bay.
5. Install your new SSD into your computer’s drive bay and connect the SATA cable.
6. Close your computer case.
7. Finally, plug in all the cables and power on your computer.