IN1501 COMPOSITE VIDEO TO S–VIDEO / S–VIDEO TO COMPOSITE VIDEO TRANSCODER IN1501 OPERATION MANUAL
Installation and Safety Instructions For Models without a Power Switch: The socket outlet shall be installed near the equipment and shall be accessible. For all Models: No serviceable parts inside the unit. Refer service to a qualified technician. For Models with Internal or External Fuses: For continued protection against fire hazard, replace only with same type and rating of fuse.
1 Product Overview DESCRIPTION The IN1501 is a high quality bi-directional transcoder for composite video and S-Video signals. Featuring advanced digital signal processing techniques, the unit offers both composite video to S-Video transcoding and S-Video to composite video transcoding capabilities. The IN1501 is an excellent choice for a variety of applications requiring video signal conversion between these popular video formats.
2 OUTPUT S-Video Input / Composite Video Output - the output standard is not modified (NTSC in / NTSC out, PAL in / PAL out, etc.). The output refresh rate for NTSC signals is 60 Hz, and 50 Hz for PAL video signals. Composite Video Input / S-Video Output - All signals are output as NTSC M or PAL. NTSC 4.43 signals are converted to NTSC 3.58. SECAM signals are converted to PAL. The output refresh rate for NTSC signals is 60 Hz, and 50 Hz for PAL video signals.
3 Operation This section focuses on operating the IN1501 using the front panel S-Video output controls. The three switches provide easy access to advanced digital signal processing circuitry that allows users to achieve optimal video display quality. Note: The front panel controls are only functional in S-Video output applications. FRONT PANEL CONTROLS Color Bar Generator - acts as a video test signal and also allows operators to manually adjust the hue of their display device.
4 Specifications IN1501 Bi-Directional Transcoder Input Composite Video Signal Level S-Video Signal Standards Supported Output Composite Video Signal Level S-Video (1) BNC female 1.0 Vp-p typical, 75 Ohm impedance (1) 4-pin mini-DIN female Luma: 0.7 Vp-p typical, 75 Ohm impedance Chroma: 0.3 Vp-p typical, 75 Ohm impedance NTSC (M), PAL (B, D, G, H, & I), SECAM and NTSC 4.43 (1) BNC female 1.0 Vp-p typical, 75 Ohm impedance (1) 4-pin mini-DIN female Luma: 0.7 Vp-p typical, 75 Ohm impedance Chroma: 0.
5 Troubleshooting Problem: There is no image on the display device. Solution 1: Make sure the power adapter is securely plugged into the unit and the A/C source. Solution 2: Make sure the A/C source is live. Solution 3: Verify that the power switch is turned on for the video source and the display device. Solution 4: Verify the connection to the output display device. Solution 5: Use the color bar generator to isolate signal interruption. Problem: The image on the display device contains static (snow).
6 Warranty • INLINE warrants the equipment it manufactures to be free from defects in materials and workmanship. • If equipment fails because of such defects and INLINE is notified within two (2) years from the date of shipment, INLINE will, at its option, repair or replace the equipment at its plant, provided that the equipment has not been subjected to mechanical, electrical, or other abuse or modifications.