User's Guide

5
Features
Front Panel
1. Antennas: Connect the two included diversity antennas here to use wireless microphones.
2. Combo Inputs with Volume Control: Use a standard 1/4" (6.35 mm) TRS or XLR cable
(not included) to connect your sound source to each input. Use the Volume knob to adjust
the level of each one.
3. Line/Mic/Wireless Mic Switch: Use this switch to set the Input to accept a Line-level, a
Mic-level, or a wireless mic sound source.
Note: When using an instrument with passive pickups, set the switch to the Mic setting.
When using an instrument with active pickups, set the switch to the Line setting.
4. Bass/Treble Control: Adjust outer knob to control the Line/Mic/Wireless Mic Bass level.
Adjust inner knob to control the Line/Mic/Wireless Mic Treble level.
5. Bluetooth: Press this button to connect/disconnect from a paired Bluetooth device.
6. Auxiliary Input with Volume Control: This stereo 1/8” (3.5 mm) input can be used to
connect a CD player, MP3 player, or other audio source. The Volume control adjusts
auxiliary input and Bluetooth volume.
7. Master Volume Control: This adjusts the loudspeaker's main mix volume, which includes
Instrument/Microphone Inputs, wireless microphone signals, Auxiliary Input, and the audio
of a paired Bluetooth device.
8. Line Out: This 1/4" (6.35 mm) TRS output can be connected to an auxiliary input or to a
mixer. The Line Out is post-Master Volume Control.
AUX IN
LINE OUT
TREBLEBASSTREBLEBASS
VOLUME VOLUME
2
WIRELESS
MIC
MIC
LINE
BATTERY LEVEL
FOR MAXIMUM BATTERY LIFE:
-CHARGE FULLY BEFORE STORAGE
-AVOID STORAGE IN FREEZING
CONDITI ONS
-CHARGE BI-MONTHLY
MASTER
BT/AUX
VOLUMEVOLUME
1
CHARGE
OFF
ON
100%
75%
50%
25%
0%
5V 1A
CHARGE
POWER
WIRELESS
MIC
MIC
LINE
PROFESSIONAL MOBILE PA/DIVERSITY RF SYSTEM/BLUETOOTH
CONVOY
1
1
2
2
3
4
4
5
6
7
8
9
11
12
13
10