User's Manual

Setup

Important: Connect all cables securely and properly (with stereo cables: left with left, right with right), and do not

bundle them with the power cable.

1. Use XLR cables, a stereo RCA cable, a digital coaxial cable, or a digital optical TOSLINK cable to connect the

Outputs (Analog or Digital) to the inputs of your external receiver, amp, powered monitors, etc.

2. Connect the FM Antenna on the back of the unit, if needed.

3. After completing all the connections, use the included power cable to connect the AC Input to a power outlet.

4. Power on DN-350UI.

5. To connect DN-350UI to a network, turn the Jog Dial to select System Settings from the main menu, and then

choose Internet Setup. Use the Wizard to automatically search for and connect to local networks. To manual

configure network settings, choose Manual Settings. For wired network connections, make sure DN-350UI is

connected to your network switch or router by Ethernet cable from the Ethernet port.

Example

Items not listed under Introduction > Box Contents are sold separately.

Operation

To navigate the menu:

• Turn the Jog Dial to scroll through options in the display.

• Press the Jog Dial to select an option.

• Press the Back button to move backwards in the menu.

Powered Monitors

FM Antenna

USB Flash

Drive

Power

Receiver

Bluetooth Device Router