ROAD ROCKER QUICKSTART GUIDE ENGLISH ( 3 – 5 )
QUICKSTART GUIDE (ENGLISH) 1. 2. 3. 4. 5. 6. 7. 8. 9. Make sure all items listed on the front of this guide are included in the box. READ SAFETY INSTRUCTION BOOKLET BEFORE USING THE PRODUCT. MAKE SURE THAT YOU HAVE COMPLETELY CHARGED THE BATTERY PRIOR TO FIRST USE FOR MAXIMUM BATTERY LIFE. Study this setup diagram. Place product in an appropriate position for operation. Make sure all input devices such as microphones, CD players, or mp3 players are turned off and volume settings are set at "zero.
9 DIAGRAM AND PARTS DESCRIPTION 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 8 Instrument / Microphone Input with Volume Control (1/4") – This mono input accepts a 1/4" input such as a microphone, guitar, or other musical instrument. Auxiliary input – This stereo 1/8” input can be used to connect a CD player, MP3 player, or other audio source. Bluetooth® – The Paired LED will be lit when a device is paired to ROAD ROCKER.
SPECIFICATIONS Input Voltage: Power Adapter - 9V DC, 2A, Center pin positive, tip negative. Battery - 6V, 2.6AH Input Wattage: 15W when USB charging is not being used, 20w when USB charging is being used. Output Wattage: 8W Frequency Response: (±3dB): 186hz -16khz; (Aux) 98hz -17khz Time required to fully charge the ROAD ROCKER: 5 hours Battery life: Over 6 hours* at full volume when ROAD ROCKER is fully charged. USB charging: Up to 5v.
IMPORTANT SAFETY INSTRUCTIONS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. Read these instructions. Keep these instructions. Heed all warnings. Follow all Instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
SAFETY NOTICES CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE ANY COVER. NO USER- SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY. DANGEROUS VOLTAGE: The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the user to the presence of un-insulated "dangerous voltage" within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
