User's Manual

INNCOM B574 Datasheet Page | 5
The B574 can be attached to an X-type DIN rail. To attach the B574 to a DIN rail, pull the tab (Figure
5) down and attach the bottom of the housing to the DIN rail (always mount the DIN rail with the tab
at the bottom). Once the unit is sitting flush on the rail, release the tab. To remove the B574 from the
DIN rail, pull the tab down and lift the bottom edge of the unit off the DIN rail first. This ensures that
TAB
Figure 5: B574 DIN Rail Installation
B574.RF
Figure 6: B574 Series DIN Rail Mounted