User's Manual

INNCOM PC-502.2 Datasheet Page | 3

Commissioningȱ

The PC-502.2 must be bound to the controlling device (e.g., the E529.RF in Figure 2 above) to

receive configuration information. On the E529.RF in service mode

x Open the

run

menu and press Off/Auto

x Set the value to 3 and press Display

x When Display is pressed, the e529.RF sends Layer-2 configurations to the PC-502.2. (This

function does not offer any feedback on the screen so it is recommended that the Display

button be pressed 3 or 4 times to ensure configuration.)

Safety/Regulatoryȱ

Parameterȱ Conditionȱ Statusȱ

FCC Part 15b 02-9994 is FCC listed. 02-9894, and 02-9927 FCC listings are pending.

PCȬ502.2ȱDimensionsȱ

HeaderȱandȱConnectionsȱ

H3ȱ(InȱSystemȱProgramming)ȱ

Pinȱ Functionȱ Typeȱ Minȱ Maxȱ

1-8 Programming - - -

H4ȱ/ȱH5ȱ(S5ȬbusȱIn/Out)ȱ

Pinȱ Functionȱ Typeȱ Minȱ Maxȱ

1-GND Common - - -

2-12VDC Input voltage In 11.75 12.25