User Manual

K 5 9 5 D a t a s h e e t P a g e | 2
Description Value
Room ID 65535
RF Channel 26
TX Power 0x5F (0dB)
P5 Address 189
P5 Channel 1
I/O Map 255
Installation
The individual guestroom design determines the K595’s installation location. Placement should provide
maximum room coverage by the PIR motion detector while maintaining RF communication between the device
and the e4 thermostat. Ideally, the K595 should be positioned on a wall in opposition to entrances and interior
doors (8ft. high, 0° angle, 0° pitch). The K595 PIR lens is pitched at a downward angle of 60° for optimal range
and minimized blind area below the unit. It should be positioned to view both the guestroom entry door and the
bed areas.
The K595 should be mounted within operational range of the e4 thermostat and any other devices it may
communicate with. Avoid possible sources of radio interference such as metallic boxes, WiFi access points,
microwave ovens, water pipes, and the like.
Refer to the K595 Installation Manual for detailed installation instruction.
Commissioning
Refer to the K595 Installation Manual or the uCBL Engineering Manual for commissioning instructions.