Instructions / Assembly

STEP-BY-STEP ASSEMBLY:

Attach Front Legs (C) to Seat (A) by

inserting 3x 2.55” Bolts (H) on each side into

the corresponding holes. Secure each bolt with

a washer (G) and nut (F) as pictured.

Attach the front part of the Arms (D) to the

Front Legs (C) using 2.55” Bolts (H) and secure each

with washer (G) and nut (F) as pictured on each side.

Attach the Back (B) to the Seat (A) using

2.4” Screws (J). Attach Back (B) to Arms (D) using

3.15” Screws (L) as pictured.

Attach Back Seat Beam (E) between the

rear legs using 2.4”Screws (J) as pictured.

Lock Nut - 8Pcs

Washer - 8Pcs Bolts 2.55” - 8Pcs

Screws 2.4” - 4Pcs

Screws 3.15” - 2Pcs

Allen Wrench - 1Pc Wrench - 1Pc

Seat - 1Pc

Back - 1Pc

Front Legs - 2Pcs

Arms - 2Pcs

Back Seat Beam - 1Pc

STEP 1:

STEP 2:

STEP 3:

STEP 4:

IITEM NAME: HDPE Adirondack Chair

ITEM NO.:FYSW31

PAGE 1
IITEM NAME: HDPE Adirondack Chair ITEM NO.:FYSW31 STEP-BY-STEP ASSEMBLY: STEP 1: Attach Front Legs (C) to Seat (A) by inserting 3x 2.55” Bolts (H) on each side into the corresponding holes. Secure each bolt with a washer (G) and nut (F) as pictured. STEP 2: Attach the front part of the Arms (D) to the Front Legs (C) using 2.55” Bolts (H) and secure each with washer (G) and nut (F) as pictured on each side. 1 2 D1 1 2 D2 STEP 3: Attach the Back (B) to the Seat (A) using 2.4” Screws (J).