WALL MOUNTED POT FILLER FAUCETS AE Tools You Will Need Pliers Drill Cross Screwdriver Adjustable wrench Pipe tape Allen key For easy installation of your faucet, you will need: To read all the instructions completely before beginning. To read all warnings, care and maintenance information To purchase the correct water supply hook-up. WARNING: Connect to Cold Water Only. Wall Mount Models. Use of stringers is recommended for a secure mounting.
Installation Hg ng i] HERB: Com pl i Cold Ware Sly 1. Connect to 1/2° IPS supply line. The pipe should extend .1/2” past the finished wall surface. 3. Mark the screw holes {1) in the flange. Thread the faucet from the pipe. 4, Drill holes where marked. If using the provided anchors (1). dnl 12 (dem) holes.
5. Wrap plumber tape (1) around pipe threads. install the gasket (2) and the flange (3) using the 3 screws (and anchors if required) provided od 6. Place flange trim (1) onto the faucet as shown. Thread faucet onto pipe. Tighten securely, but do not over tighten. 7. Tighten set screw in flange (1). Slide flange trim (2) over the wall flange.
Checking and Testing a Flush Your System Remove aerator (1) and turn faucet handles (2) to the full on position. Turn on cold water supplies and flush water lings for one minute. Important: This flushes away any debris that could cause damage to internal parts. Check all connections at arrow for leaks. Re-tighten if necessary, but do not over tighten Coin-open style aerator With coin-open tools, easy for installation and cleaning at any time. Notice Property damage and water leak possible.
