Operation Manual

121
CONCEPT 4000.CONCEPT 4000.
CONCEPT 4000.CONCEPT 4000.
CONCEPT 4000. User Manual.
OPERATION
Logging On.
All operations begin with entering your PIN code, followed by the <OK> key.
(Beeper feedback is provided for each key press)
If the PIN code is valid at this time, the CODE lamp will turn on and the User is
considered “logged on”.
If the PIN code is not accepted, the CODE lamp will flash a number of times to give a
general indication of the reason for rejection. See “Error indication” below.
If an error is made while entering a PIN code, press the <ON/OFF> key and begin
entering the code again. If 3 unsuccessful logon attempts are made in succession, the
keypad will be locked out for 60 seconds and the CODE lamp will flash continuously
during that time. (This can be set to 10 attempts by the Installer if required)
Whilst the CODE lamp is on, the ARMED lamp will display the on/off state of the
nominated Area. (ARMED lamp on means Area on)
Area and/or Door control.
Whilst logged on:
- The <OK> key will attempt a Door access operation then logoff the User.
- The <ON/OFF> key will attempt to toggle the status of the nominated Area.
If successful, the ARMED lamp will change state, and the User remains logged on.
- If the <0> key is pressed, or no key is pressed for 5 seconds, the User is
automatically logged off, and the CODE and ARMED lamps will turn off.
Error Indication.
If a Door access or Area toggle operation is not successful, the CODE lamp or
ARMED lamp will flash a number of times to give a general indication of the reason
for rejection. The Review log [MENU, 1, 1] can be viewed to see details of the
specific reason for rejection.
Flash Reasons
5 Area On denied - Unsealed Zones, Missing Module or No Associated Area.
4 No Door Programmed / No Access Group Assigned / Door not in Door List /
Terminal illegal / Terminal already in use / Terminal not present
3 Card Cancelled / Area Armed / Wrong Card Issue number / Not Site Code
User / Card Format Mismatch / No Card Found / User number too big / Site
Code not found / Card not found
2 TimeZone violation / Card Expired / Anti-passback violation / Need PIN /
Wrong PIN / No Terminal for PINs / No Door List / Time-out for 2nd User.
W’PROOF