Operation Manual

44
CONCEPT 4000.CONCEPT 4000.
CONCEPT 4000.CONCEPT 4000.
CONCEPT 4000. User Manual.
READ POWER MODULE VALUES
In some systems LAN Power Supply Modules are
installed to provide flexible, general purpose,
battery-backed power supply solutions with the
added advantage of immediate status reporting of
Power Supply conditions and problems via the
LAN network.
“READ POWER MODULE” can then be used to
display the current values of Voltage and Current
for both the Battery Charger and Detector Power
outputs. (V4.5 or later only)
Four Power Module Parameters can be viewed:
-Battery Charger Output Voltage.
-Battery Charger Output Current.
-Detector Output Voltage.
-Detector Output Current.
The display will prompt for a Power Module
number to view.
The <UP> and <DOWN> arrow keys can be used
to search for a particular Power Module,
OR
Use the <DIGIT> keys to enter the Power Module
number.
Press the <OK> key to select the module number
displayed.
The display will show the value of the Battery
Charger Output Voltage on the selected module.
The displayed value is updated every 2 seconds.
Updates will timeout after 2 minutes. The <ON>
key can be used to refresh the display.

















