User's Manual
Table Of Contents
- 1 Safety Information
- 2 Spot System Description
- 3 Using the Web-Based Interface
- Appendix A – Master Radio FCC Compliance Information
- Appendix B – Beacon FCC Compliance Information
- Appendix C – Tag FCC Compliance Information
- Appendix D – Mini Tag FCC Compliance Information
- Appendix E – Antenna Specification
- Appendix F – Li/MnO2 Battery Disposal
The following figure illustrates the features of the Location List Filter.
Figure 13 Location List Filter
Options for the Location List Filter include sorting by Building, Wing, Floor, or Location Zone.
The pull-down menus are only active if these locations have been mapped into your Spot System.
The following table lists the available list filter sorting parameters for Tags, Master Radios and Beacons.
Table 1 List Filters
List Type Filter Categories Available Sort Parameters
ESN Enter ESN number
Tag
Report Rate 5, 10 20, 40, 80, 160 seconds, 5 minutes, or inactive
Battery Good, or Not Good.
Location Building, Wing, Floor, or Location Zone
ESN Enter ESN number
Status
Inactive, Disconnected, Connecting, Registered, Lost Sync, Synchronizing, or
Operational
Master Radio
Sync Island Default Island of Synchronization
Type Receive Only, Transmitter
Sync-Source Eligible Eligible, Not Eligible
Location Building, Wing, or Floor
ESN Enter ESN number
Beacon
Status Unheard, Unregistered, Registering, Confirmed, Timing Out
Battery Good, Not Good
Location Building, Wing, Floor, or Location Zone
Spot RFLS User's Manual Page 16
5/24/2007