User's Manual

First Draft - CISCO CONFIDENTIAL
B-3
Cisco Aironet 1200 Series Access Point Hardware Installation Guide
OL-4310-02
Appendix B Declarations of Conformity and Regulatory Information
Department of Communications—Canada
Department of Communications—Canada
Canadian Compliance Statement
This Class B Digital apparatus meets all the requirements of the Canadian Interference-Causing
Equipment Regulations.
Cet appareil numerique de la classe B respecte les exigences du Reglement sur le material broilleur du
Canada.
This device complies with Class B Limits of Industry Canada. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired
operation.
Cisco Aironet 2.4-GHz Access Points are certified to the requirements of RSS-210 for 2.4-GHz spread
spectrum devices, and Cisco Aironet 54-Mbps, 5-GHz Access Points are certified to the requirements of
RSS-210 for 5-GHz spread spectrum devices.The use of this device in a system operating either partially
or completely outdoors may require the user to obtain a license for the system according to the Canadian
regulations. For further information, contact your local Industry Canada office.
Table B-1 Access Point 2.4-GHz Antennas
Radio Antenna
IEEE 802.11B IEEE 802.11G Cisco Part Number Model Gain (dBi)
Yes – AIR-ANT1949 Yagi 13.5
Yes – AIR-ANT4121 Omni-directional 12.0
Yes – AIR-ANT24120 Omni-directional 12.0
Yes Yes AIR-ANT2410Y-R Yagi-directional 10.0
Yes Yes AIR-ANT3549 Patch 8.5
Yes Yes AIR-ANT2012 Spatial diversity 6.5
Yes Yes AIR-ANT1729 Patch 6.0
Yes Yes AIR-ANT2506 Omni-directional 5.1
Yes Yes AIR-ANT3213 Omni-directional 5.0
Yes Yes AIR-ANT1728 Omni-directional 5.0
Yes Yes AIR-ANT3195 Patch 3.0
Yes Yes AIR-ANT5959 Omni-directional 2.0
Yes Yes AIR-ANT4941 Dipole 2.2