Operating Instructions

ManualsBrandsInno-Tek Electronic & Plastic Manufacturer ManualsElectronicsRemote control

Thank you for your purchase.

Please contact us if you have any questions.

We will get back to you within 24 hours.

Email: support@dewenwils.com

Please attach your Order ID so that

we can serve you better.

Remote Control Outlets

Summary of content (4 pages)

PAGE 1
Remote Control Outlets Thank you for your purchase. Please contact us if you have any questions. We will get back to you within 24 hours. Email: support@dewenwils.com Please attach your Order ID so that we can serve you better.
PAGE 2
Warning To reduce the risk of fire, electric shock or personal injury, please strictly follow the instructions. 1.To prevent water immersion, the outlet must be mounted in a vertical position with the outlets facing downward and at least 2ft above the ground level. 2.Do not immerse in water. 3.Do not connect any devices which may exceed the maximum ratings of this remote outlet. 4.Do not disassemble or repair the product, but only by authorized service personnel. 5.
PAGE 3
Cancelling All Programming Cancel all programming so that no remote transmitter can control it: -Press the programming button on the receiver until the indicator light begins to flash rapidly Note: The light flashes from slowly to rapidly. -Release the programming button and then press it again. The indicator light will be off. All the programming has been canceled. No Interference Remote control outlets adopt variable learning codes technology. The codes will be changed each time after re-programming.
PAGE 4
- Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.