User Manual

AW.S905D3.03 （ N ）
QR-ZZPJ-017A
版权 CVTE 所有，本文档内容属商业机密。未经允许，任何组织或个人不得以任何形式复制和传播。
7
7. CONFIGURATION & GENERAL PRECAUTIONS
（使用注
意事项）
 Relative humidity: ≤ 80%.
 相对湿度： ≤ 80%。
 Storage temperature: -10~60°C.
 存储温度： -10~60°C。
 System Operating: 0~40°C.
 系统工作温度：0~40°C。
 Protect the board from static electricity in case of damage to the IC.
 请使板卡远离静电。
 Keep the board away from conductor when it is working.
 请确保板卡工作时远离导体。
 Do not press the PCBA during transportation or placement.
 在运输、放置时，请勿重压板卡。
 Do not bend or deform the board during the whole machine assembling, especially when
connecting the cable.
 在整机组装过程，特别是接插线时，请勿使板卡弯折变形。
 Do not plug or unplug the cable while the board is working.
 板卡工作时，请勿插拔线材。
 Mount the board considering the heat dissipation direction of your TV set to avoid abnormal
system work because of poor heat dissipation.
 请注意结合整机散热方向安装板卡，避免散热不佳引起系统工作异常。
 Clean the board with soft dry cloth when it’s dirty.
 如果板卡脏了，请用干布擦拭。
 Don’t power on before panel is correctly connected.
 正确接好驱屏线前请勿接通电源。
 The whole machine certification performance will be subject to the impact of the whole
machine, must use the whole machine to test and confirm.
 整机认证性能会受整机匹配的影响，必须使用整机进行测试确认。
 When using the I2C interface to communicate with the outside, please confirm the
matching of the pull up resistance and the series resistance with CVTE hardware engineer.