User's Manual
Introduction
This document describes Key feature, pin definition, mechanical drawing,
Recommendation for PCB Layout and operation temperature and voltage range, and
reflow data of Bluetooth Low Energy Module and it can helps designer to design in
easier and manufacturing smoothly.
BLE module Install Guide line
Key Features
RF
• 2.4-GHz Bluetooth low energy Compliant and Proprietary RF Single Mode Module
• Supports 250-kbps, 500-kbps, 1-Mbps, 2-Mbps Data Rates
• Software programmable adjustable transmitter power (-20dBm to 5dBm) for short
to long range applications
• Suitable for Systems Targeting Compliance With Worldwide Radio Frequency
Regulations: ETSI EN 300 328 and EN 300 440 Class 2 (Europe), FCC CFR47
Part 15 (US), and ARIB STD-T66 (Japan)
Layout
• Few External Components
• 25.45 mm × 16.7 mm × 2 mm, 40 pin LCC Package
Low Power
• Wide supply voltage range : 1.8 – 3.8V
• Differential RF mode : 6.4±3 mA
• Differential RF mode TX at 0 dBm: 6.8±3 mA
• Differential RF mode TX at +5 dBm: 8.9±3mA
• Low Power Mode: 1 μA (RTC Running + RAM/CPU retention)
• Low Power Mode: 100 nA (Flash retention)
• Optional on-chip DC/DC converter (not available in 1.8V mode)
Peripherals
• Integrated temperature sensor
• 4 General-purpose Timer Modules (8x 16-bit or 4x 32 bit-timer, PWM each)
• 12-bit ADC, 200 ksamples/s, 8 channel analog MUX