User Manual

iCOM_BM10_AN R2 Module Product Specification
REV 1.3 9/26/2017
InnoComm Mobile Technology Confidential
11
/
19
5. RF Characteristics
1 Mbps GFSK (Bluetooth low energy)
Unless noted, all specifications are at 25 °C, Vbat = 3.0 V and fRF = 2440MHz.
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
RX Receiver sensitivity Differential mode, measured in 50Ω single-ended, BER=10-
3
-97 dBm
TX Output power, highest setting Differential mode, delivered to a single ended 50 Ω load +5 dBm
TX Output power, lowest setting Delivered to a single ended 50Ω load -20 dBm
Spurious emission 30-1000 MHz Conducted measurement in a 50Ω single ended load.
Complies with EN 300 328, EN 300 440 class 2, FCC
CFR47, Part 15 and ARIB STD-T-66
-57 dBm
Spurious emission 1-12.75 GHz -47 dBm
Note: BM10_AN R2 module is with “Internal bias” mode design and related SW setting need to match with
“Internal bias” mode.