User Manual

iCOM_BM10_AN R2 Module Product Specification
REV 1.3 9/26/2017
InnoComm Mobile Technology Confidential
2
/
19
Revision History
Revision
Released
Date Comments/Remark Author
1.0 2017/03/07 Initial release Aaron Lai
1.1 2017/03/29 Update reflow profile Aaron Lai
1.2 2017/06/07 Update GPIO pin count to 31 and module photo Aaron Lai
1.3 2017/07/10 Update GPIO pin 31 description and Reference
Circuit
Aaron Lai
1.4 2017/09/26 Update ME drawing, layout and placement
section
Aaron Lai
® 2017 InnoComm Mobile Technology Corp.
Disclaimer
BM10_AN R2 BLE MODULE are supplied “as is” and without warranties of any kind, express, implied, or
statutory including, but not limited to, any implied warranty for a particular purpose. No license is granted by
implication or otherwise under any patents or other intellectual property by application or use of evaluation
boards. Information furnished by InnoComm is believed to be accurate and reliable. InnoComm reserves the
right to change specifications or product description in this document at any time without notice.
Should Buyer purchase or use InnoComm’s products for any such unintended or unauthorized application,
Buyer shall indemnify and hold InnoComm harmless against all claims and damages.
InnoComm is the trademarks of InnoComm Mobile Technology Corp.
Other trademarks and registered trademarks mentioned herein are the property of their respective owners.