Datasheet

www.innodisk.com

Datasheet

SATADOM-MV

3ME series

- SATA 6Gb/s interface

- iSMART disk health monitoring

- Intelligent error recovery system

- Excellent data transfer speed

- Write protection security

- Zero mechanical interference

- Anti-vibration mechanical design

Introduction

Innodisk SATADOM-MV 3ME is designed as the standard SATA 7 pin connector with

SATA interface, and supports SATA III standard (6.0Gb/s) with excellent

performance. Regarding of mechanical interference, InnoDisk SATADOM-MV 3ME

absolutely replaces the traditional hard disk and makes personal computer, in any

field, smaller and easier.

Innodisk SATADOM-MV 3ME effectively reduces the booting time of operation

system and the power consumption is less than hard disk drive (HDD), and complies

with ATA protocol, no additional drives are required, and can be configured as a

boot device or data storage device.

PAGE 1
Datasheet SATADOM-MV 3ME series - SATA 6Gb/s interface iSMART disk health monitoring Intelligent error recovery system Excellent data transfer speed Write protection security Zero mechanical interference Anti-vibration mechanical design Introduction Innodisk SATADOM-MV 3ME is designed as the standard SATA 7 pin connector with SATA interface, and supports SATA III standard (6.0Gb/s) with excellent performance.
PAGE 2
SATADOM-MV 3ME series Contact us for more information about the SATADOM-MV 3ME. Diagram Innodisk is a service-driven provider of industrial embedded flash storage products and technologies, with a focus on the cloud computing, industrial/embedded, and aerospace and defense industries. Specifications Interface Flash Type 3,000 Capacity 8GB~128GB Sequential R/W (MB/sec, max.) Max. Power Consumption 5F., No. 237, Sec. 1, Datong Rd., Xizhi Dist., New Taipei City, Taiwan (R.O.C.