Datasheet

www.innofil3d.com
Technical Data Sheet Innoflex 45 Rev 130815
Monofilament suitable for all commercially available leading brands 3D FDM/FFF printers
IDENTIFICATION OF THE MATERIAL
Trade name
Innoflex 45 Arnitel Eco 40D
Chemical name
DSM Arnitel Eco
Chemical family
Biobased High Performance Thermoplastic
Copolyester TPC
Use
3D-Printing
Company
Innofil3D BV
MATERIAL PROPERTIES
Test Method
Melting temperature (10°C/min)
180°C
ISO 11357-1/-3
Glass transition temperature Tg
-35°C
ISO 11357-1/-2
Density
1150 kg/m³
ISO 1183
Stress at break
24 MPa
ISO 527-1/-2
Elongation at Break
>300%
ISO 527-1/-2
Tensile modulus
95 MPa
ISO 527-1/-2
Shore D hardness
45
ISO 868
Food Contact
Natural grade is FDA approved
Coloured grades not tested
UV resistance
High
MONOFILAMENT DATA
Test Method
Diameter 1.75
1.75 ± 0.05 mm
Innofil3D
Diameter 2.85
2.85 ± 0.10 mm
Innofil3D
Max. roundness deviation 1.75
0.05 mm
Innofil3D
Max. roundness deviation 2.85
0.10 mm
Innofil3D
Color (RAL)
N.A.
Innofil3D
Print temperature guideline
230 ± 20°C
Innofil3D
Print speed guideline
Comparable or slower than PLA (PLA: 30 - 80 mm/s)
Innofil3D