DE EN FR NL innogy Aufsatzmodul innogy plug-on module innogy module complémentaire innogy opzetmodule Seite 2 Page 14 Page 26 Pagina 38
DE Hinweise zu dieser Anleitung Lesen Sie vor der ersten Inbetriebnahme diese Bedienungsanleitung und die Bedienungsanleitung zu den eingebundenen SmartHome Komponenten gründlich durch und befolgen Sie vor allen Dingen die Sicherheitshinweise! Alle Tätigkeiten an und mit diesem Gerät dürfen nur soweit ausgeführt werden, wie sie in der Bedienungsanleitung beschrieben sind.
DE Bestimmungsgemäßer Gebrauch Mit dem innogy Aufsatzmodul können Sie neben den SmartHome Geräten von Medion gleichzeitig auch die Geräte von innogy einbinden und steuern. Achten Sie daher darauf, dass dieses Aufsatzmodul vor dem Einbinden der innogy SmartHome Geräte auf die Medion Smart Home Zentrale gesteckt ist.
DE Bedienung gilt als nicht bestimmungsgemäß und kann zu Personen- oder Sachschäden führen. • Betreiben Sie das Gerät nur in Innenräumen. Vermeiden Sie den Einfluss von Feuchtigkeit, Staub sowie Sonnen- oder andere Wärmebestrahlung. • Nutzen Sie das Gerät nicht unter extremen Umgebungsbedingungen. • Ziehen Sie immer am Stecker, nicht am Netzkabel. • Geräte nicht in Betrieb nehmen, wenn sie sichtbare Schäden aufweisen.
DE Voraussetzungen • Medion Smart Home Zentrale • Internet-Router (WLAN möglich) • Smartphone, Tablet oder ein PC mit einem aktuellen Browser.
DE Montage Um das innogy Aufsatzmodul anzubringen, gehen Sie wie folgt vor: 1. Drücken Sie mindestens drei Sekunden die Powertaste an der Medion Smart Home Zentrale zum Herunterfahren des Betriebssystems. 2. Nachdem die LED der Powertaste erloschen ist, ziehen Sie den Anschlussstecker des Netzteils heraus. 3. Hebeln Sie an den Aussparungen die Deckel sowohl von der Medion Smart Home Zentrale als auch vom innogy Aufsatzmodul ab. 4.
DE 5. Verbinden Sie nun beide Geräte mit den mitgelieferten Schrauben im Inneren des innogy Aufsatzmoduls. 6. Setzen Sie den Deckel wieder auf das innogy Aufsatzmodul. 7. Stecken Sie den Anschlussstecker des Netzteils wieder in das Gerät. Sie können jetzt mit der Inbetriebnahme/Ersteinrichtung beginnen.
DE Inbetriebnahme Sollten Sie bereits SmartHome Geräte über die Medion Smart Home Zentrale steuern, können Sie ab sofort auch innogy SmartHome Geräte einbinden und nutzen. Ihre bereits erstellten Szenarien und Einstellungen bleiben erhalten. Ersteinrichtung für Neukunden Führen Sie die Ersteinrichtung nur dann durch, wenn Sie noch keine Medion Smart Home Zentrale nutzen. Sie können die Registrierung der Zentrale im Internet unter https://home.innogy-smarthome.
DE 3. Geben Sie Ihren Benutzernamen und das gewählte Passwort ein, um sich anzumelden. 4. Wählen Sie nach erfolgreicher Anmeldung die Zentrale (2. Generation) aus. 5. Folgen Sie den weiteren Schritten.
DE Allgemeiner Hinweis Hiermit erklärt innogy SE, dass sich dieses Gerät in Übereinstimmung mit den grundlegenden Anforderungen und deren einschlägigen Bestimmungen befindet: • RE-Richtline 2014/53/EU • Öko-Design Richtlinie 2009/125/EG • RoHS-Richtlinie 2011/65/EU Die vollständige Konformitätserklärung finden Sie unter: www.innogy.
DE Technische Daten Stromversorgung DC 5 V/0,5 A (wird von der Medion Smart Home Zentrale bereitgestellt) Frequenzbereich 868,1 - 868,5 MHz Max. Sendeleistung 10 mW Freifeldreichweite 100 - 300 m (je nach Funkpartner) Duty Cycle <1 % pro h Empfängerklasse SRD Class 2 Schutzart IP20 USB-Anschlüsse 3 x USB 2.0, max.
DE Entsorgungshinweis Gerät nicht im Hausmüll entsorgen! Elektronische Geräte sind entsprechend der Richtlinie für Elektro- und Elektronik-Altgeräte über die örtlichen Sammelstellen für Elektronik-Altgeräte zu entsorgen. Das CE-Zeichen ist ein Freiverkehrszeichen, das sich ausschließlich an die Behörden wendet und keine Zusicherung von Eigenschaften beinhaltet. 1. Ausgabe Deutsch 07/2018 Dokumentation © 2018 innogy SE, Deutschland. Alle Rechte vorbehalten.
DE
EN Information about this manual Read this operating manual and the operating manual for the integrated SmartHome components thoroughly before initial commissioning, and in particular follow the safety instructions! All work on and with this device must only be carried out as described in the operating manual. Keep this operating manual to hand at all times and store it in a safe place in order to hand it on to the new owner in the event of a sale.
EN Intended use In addition to the Smart Home devices from Medion, the innogy plug-on module allows you to also integrate and control devices from innogy. Therefore, make sure that this plug-on module is plugged into the Medion Smart Home Central unit before integrating the innogy SmartHome devices. Please note that improper use will invalidate any liability! Hazard warnings • Do not convert the device without our consent and do not use any accessory devices not approved or supplied by us.
EN • Only operate the device indoors. Avoid the influence of humidity, dust, sunlight and other heat radiation. • Do not operate the device in extreme ambient conditions. • Always pull on the plug, not on the power cable. • Do not commission devices if they show visible signs of damage. • Do not in any circumstances independently make or attempt any modifications to the devices or try and open and/or repair a device part yourself. The devices do not contain any parts to be serviced.
EN Prerequisites • Medion Smart Home Central unit • Internet router (WLAN possible) • Smartphone, tablet or a PC with a current browser Scope of delivery 1 x device 2 x fixing screws 17
EN Installation Proceed as follows to attach the plug-on module: 1. Press the power button on the Medion Smart Home Central unit for at least three seconds to shut down the operating system. 2. Once the LED in the power button has gone out, disconnect the connecting plug of the power pack. 3. Lever off the covers of both the Medion Smart Home Central unit and the innogy plug-on module at the recesses. 4.
EN 5. Now secure both devices using the supplied screws inside the innogy plug-on module. 6. Place the cover back on the innogy plug-on module. 7. Plug the connecting plug of the power pack back into the device. You can now start commissioning/initial set-up.
EN Commissioning If you are already managing SmartHome devices via the Medion Smart Home Central unit, you can also incorporate and use innogy SmartHome devices with immediate effect. Any scenarios and settings you have already made will be retained. Initial set-up for new customers Only perform initial set-up if you do not already use a Medion Smart Home Central unit. You can register the centre online at https://home.innogy-smarthome.
EN 3. Enter your user name and the password you chose to log in. 4. After successful log-in, select the centre (2nd generation). 5. Follow the next steps.
EN General information innogy SE hereby declares that this device meets the basic requirements and the relevant provisions set out in: • Radio Equipment Directive 2014/53/EU • Ecodesign Directive 2009/125/EC • RoHS Directive 2011/65/EU You can find the complete declaration of conformity at: www.innogy.
EN Technical data Power supply DC 5 V/0,5 A (supplied by the Medion Smart Home centre) Frequency range 868,1 - 868,5 MHz Maximum transmission power 10 mW Free-field range 100 - 300 m (depending on the radio partner) Duty Cycle < 1 % per hour Receiver class SRD Class 2 Protection class IP20 USB connections 3 x USB 2.0, max.
EN Information about disposal Do not dispose of the device in the household waste! Electronic devices are to be disposed of via the local collection points for old electronic devices in accordance with the Waste Electrical and Electronic Equipment Directive. The CE mark is an open market sign intended exclusively for the authorities and contains no guarantee regarding characteristics. 1st English edition 07/2018 Documentation © 2018 innogy SE, Germany. All rights reserved.
FR Remarques relatives aux présentes instructions Avant la mise en service, veuillez lire attentivement les présentes instructions de service ainsi que celles des composants SmartHome intégrés et en respecter en particulier les remarques relatives à la sécurité ! Toutes les opérations effectuées sur cet appareil et avec cet appareil ne peuvent l’être que conformément aux descriptions fournies dans les instructions de service.
FR Utilisation conforme Le module complémentaire innogy vous permet d’intégrer et de gérer également des appareils d’innogy parallèlement aux appareils Smart Home de Medion. Veillez par conséquent à ce que ce module complémentaire soit placé sur la centrale Medion Smart Home avant de procéder à l’intégration d’appareils innogy SmartHome.
FR • Veuillez tenir compte de toutes les informations contenues dans les présentes informations de service, notamment les remarques relatives à la sécurité. Toute utilisation divergente est considérée comme non conforme et peut entraîner des dommages corporels et matériels. • N’utilisez l’appareil qu’en intérieur. Évitez d’exposer l’appareil à l’humidité, aux poussières, au soleil ou à toute autre source de chaleur ou de rayonnement.
FR Conditions • Centrale Medion Smart Home • Routeur Internet (Wi-Fi possible) • Smartphone, tablette ou ordinateur avec un navigateur mis à jour.
FR Montage Pour monter le module complémentaire innogy, procédez comme suit : 1. Appuyez pendant au moins trois secondes sur le bouton d’alimentation qui se trouve sur la centrale Medion Smart Home afin d’arrêter le système d’exploitation. 2. Lorsque la LED du bouton d’alimentation s’est éteinte, débranchez la fiche du bloc d’alimentation. 3. Soulevez les couvercles de la centrale Medion Smart Home et du module complémentaire innogy en faisant levier au niveau des encoches. 4.
FR 5. Raccordez maintenant les deux appareils en vissant les vis fournies à l’intérieur du module complémentaire innogy. 6. Replacez le couvercle sur le module complémentaire innogy. 7. Rebranchez la fiche de raccordement du bloc d’alimentation dans l’appareil. Vous pouvez maintenant procéder à la mise en service / première configuration.
FR Mise en service Si vous utilisez déjà la centrale Medion Smart Home pour gérer des appareils SmartHome, vous pouvez dès à présent intégrer et utiliser également des appareils innogy SmartHome. Les scénarios déjà créés et les configurations effectuées seront conservés. Première configuration pour nouveaux clients Ne procédez à une première configuration que si vous utilisez la centrale Medion Smart Home pour la première fois.
FR 2. Cliquez sur le lien fourni en guise de vérification. Vous accédez à l’écran de connexion. 3. Pour vous connecter, saisissez votre nom utilisateur et le mot de passe choisi. 4 Une fois la connexion établie, sélectionnez la centrale (2e génération). 5 Effectuez les étapes suivantes.
FR Remarque générale La société innogy SE déclare que le présent appareil est conforme aux critères fondamentaux et à leurs dispositions correspondantes : • Directive RED 2014/53/UE • Directive 2009/125/CE en matière d’écoconception • Directive RoHS 2011/65/UE Le texte intégral de la déclaration de conformité peut être consulté à l’adresse : www.innogy.
FR Données techniques Alimentation DC 5 V/0,5 A (est mis à disposition par la centrale Medion Smart Home) Bande de fréquence 868,1 - 868,5 MHz Puissance max. à l’émission 10 mW Portée à l’extérieur 100 - 300 m (selon partenaire radio) Cycle de service < 1 % par h Classe de réception AFP Classe 2 Type de protection IP20 Prises USB 3 x USB 2.0, max.
FR Remarque relative à l’élimination Ne pas jeter cet appareil avec les ordures ménagères ! Tout appareil électronique doit être éliminé en conformité avec la Directive relative aux déchets d’équipement électriques et électroniques. Il devra donc être déposé dans un centre de récupération local pour déchets électroniques. Le sigle CE est un « passeport » pour la libre circulation du produit qui ne s’adresse qu’aux autorités de contrôle et ne garantit pas la présence de caractéristiques.
NL Opmerkingen over deze instructies Lees deze handleiding en de bedieningsinstructies voor de smarthome-componenten grondig door voordat u het apparaat voor het eerst gebruikt en volg vooral de veiligheidsinstructies! Alle werkzaamheden aan en met dit apparaat mogen alleen worden uitgevoerd zoals deze in de bedieningsinstructies beschreven zijn.
NL Beoogd gebruik Met de innogy opzetmodule kunt u naast de smart-home-apparaten van Medion ook de apparaten van innogy integreren en bedienen. Zorg er daarom voor dat deze opzetmodule is aangesloten op de Medion Smart Home Centrale voordat u de innovatieve smarthome-apparaten integreert.
NL de veiligheidsinstructies. Elke andere vorm van bediening/ handeling wordt als oneigenlijk gebruik beschouwd en kan leiden tot persoonlijk letsel of schade aan eigendommen. • Gebruik het apparaat alleen binnenshuis. Vermijd de invloed van vocht, stof en zon of andere warmtestraling. • Gebruik het apparaat niet onder extreme omgevingscondities. • Trek altijd aan de stekker, niet aan het netsnoer. • • Gebruik geen apparaten als deze zichtbare schade vertonen.
NL Basisvoorwaarden • Medion Smart Home Centrale • Internet router (Wifi mogelijk) • Smartphone, tablet of een pc met een actuele browser.
NL Montage Om de innogy opzetmodule te installeren dient u als volgt te werk te gaan: 1. Druk minimaal drie seconden op de powertoets van de Medion Smart Home Centrale om het besturingssysteem uit te schakelen. 2. Nadat de POWER-knop LED uit is, koppelt u de stekker van de voeding los. 3. Til aan de uitsparingen de dop van de Medion Smart Home Centrale als ook van de innogy opzetmodule op. 4.
NL 5. Verbind nu beide apparaten met behulp van de meegeleverde schroeven binnenin de innogy opzetmodule 6. Plaats het deksel terug op de innogy opzetmodule. 7. Steek de stekker van de voeding terug in het apparaat. U kunt nu met de inbedrijfstelling/initiële installatie beginnen.
NL Inbedrijfstelling Wanneer u reeds smarthome-apparaten bedient via de Medion Smart Home Centrale, kunt u nu ook innogy smarthome-apparaten integreren en gebruiken. Uw reeds aangemaakte scenario’s en instellingen blijven behouden. Eerste installatie voor nieuwe klanten Voer de eerste installatie alleen uit als u nog geen gebruik maakt van de Medion Smart Home Centrale. U kunt de registratie de Centrale op internet uitvoeren op https://home.innogy-smarthome.
NL 3. Voer uw gebruikersnaam en wachtwoord in om u aan te melden. 4. Na de succesvolle registratie selecteert u de Centrale (2e generatie). 5. Volg de verdere stappen.
NL Opmerking Innogy SE verklaart hierbij dat dit apparaat voldoet aan de essentiële eisen en relevante bepalingen: • RE-richtliijn 2014/53/EU • Eco Design richtlijn 2009/125/EG • RoHS-richtlijn 2011/65/EU De volledige conformiteitsverklaring is te vinden op: www.innogy.
NL Technische gegevens Stroomvoorziening DC 5 V/0,5 A (Wordt door de Medion Smart Home Centrale beschikbaar gesteld) Frequentiebereik 868,1 - 868,5 MHz Maximaal zendvermogen 10 mW Open air range 100 - 300 m (afhankelijk van de radio-partner) Duty Cycle <1 % pro h Ontvangerklasse SRD Class 2 Beschermingsklasse IP20 USB-aansluitingen 3 x USB 2.0, max.
NL Verwijdering Apparaat niet bij het huisvuil deponeren! Elektronische apparatuur moet worden verwijderd in overeenstemming met de richtlijn betreffende afgedankte elektrische en elektronische apparatuur via plaatselijke inzamelpunten voor elektronisch afval. De CE-markering is een vrij handelsteken dat uitsluitend van toepassing is op de autoriteiten en geen enkele waarborg van eigenschappen bevat. 1. Uitgave Nederlands 07/2018 Documentatie © 2018 innogy SE, Duitsland. Alle rechten voorbehouden.